Skip to content

Hobby-Lobby

P-51B MUSTANG SHANGRI-LA

,

New low cost power system with great performance 33-1/2 in. ...

Hobby-Lobby

P-51D MUSTANG MARIE ARF

,

New low cost power system with great performance 33-1/2" wingspan, ...

Hobby-Lobby

P-51B MUSTANG SHANGRI-LA

,

New low cost power system with great performance 33-1/2 in. ...

Hobby-Lobby

P-51D MUSTANG MARIE ARF

,

New low cost power system with great performance 33-1/2" wingspan, ...

Hobby-Lobby

P-51 MUSTANG MK II PTS RTF (OVERSIZE)

Needed to CompleteFuel (10% to 15% nitro content), Glow Plug Wrench, Glow Plug Igniter with Charger
Glow Plug, Manual Fuel Pump, Flat blade screwdriver, Hex wrench3/32 in or 2.5mm, Felt-tipped pen, Adjustable wrench, Phillips screwdriver, Pliers
Length50.39 in (1280mm)
Experience LevelBeginner

P-51 Mustang MkII PTS RTF Highlights:, Ready-to-fly right from the box, Technical Specifications:, P-51 Mustang MkII PTS RTF Specs:, Wingspan:, 58.25 in (1479.55mm), Flying Weight:, 6.5�7 lb (2.95�3.18 kg), Engine Size:, Evolution Trainer Power System (installed), Radio:, Spektrum 2.4GHz DX6i DSM2 radio with AR6200 receiver (installed),

A Beloved Classic Designed With the Beginner in Mind Hangar ...

Hobby-Lobby

SUPER CUB 25E ARF

Technical SpecificationsSuper Cub 25e ARF Specs
Overall Length45.5 in (1160mm)
Wing Area670 sq in (43.3 sq dm)
Flying Weight5.00-5.60 lb (2.30-2.55 kg) without battery; 5.85-6.40 lb (2.65-2.9 kg) with battery
Motor SizePower 25-32
Trim Scheme ColorsWhite (U870), True Red (U866)
CG (center of gravity)2.75 to 3.00 inches (70.0 to 76.0mm) back from leading edge
Wing Loading20.1-22.0 oz/sq ft
Prop Size13 x 6.5E
Spinner Size2 inch
Recommended Battery14.8V 3200mAh 4S Li-Po
Minimum Age Recommendation14 years
Experience LevelIntermediate
Recommended EnvironmentOutdoor
Assembly Time10-15 Hours
Is Assembly RequiredYes

,

The Cub that Captivates! The Super Cub 25e - Platinum ...

Hobby-Lobby

P-51B MUSTANG SHANGRI-LA

,

New low cost power system with great performance 33-1/2 in. ...

Hobby-Lobby

ULTRACOTE GREEN

Hangar 9 UltraCote is a high tech polyester ..." />

Temp ranges are as follows:, Adhesion to wood begins at 200 to 220 degrees F., Key Features:, High tech polyester covering, Temp ranges are as follows:, Adhesion to wood begins at 200 to 220 degrees F., Surface Preparation:, The covering job can only be as good as the finish of the surface it's applied over. In order for the covering to properly adhere to a surface, the surface must first be smooth and clean. Sand the model using a sanding block and progressively finer sandpaper, with the final sanding being done with 320 grit paper. Vacuum away all of the dust, as specks of dust under the covering will leave unsightly bumps. Fill gaps and dents with a high-quality filler. If using light-colored UltraCote (such as white or yellow), use a tan-colored filler that matches the wood color to prevent the filler from showing through., Trim Film to Size:, Start by covering the bottom of one wing half. Using scissors or sharp hobby knife, cut a piece of UltraCote a few inches larger than needed to cover the wing. Remove the backing (save for later) and place the covering with the adhesive (dull) side down, centered over the wing. Set the covering iron to the application temperature of 220�F., Tacking Covering to Spar:, Tack the covering to the spar or the high point of the wing, using your iron as shown (an iron sock is highly recommened). Gently pull the covering toward the root and toward the tip, as you work the iron from the center of the spar to the root and tip of the wing. Press gently with the iron, allowing the heat (not pressure) to activate the adhesive and bond the covering to the high point. Ideally, the covering will naturally lay flat against the entire surface with a minimum of wrinkles., Covering a Solid-Sheeted Wing:, If covering a solid-sheeted wing, work from the center of the spar outward to the trailing edge and then to the leading edge as shown, using the iron at 220�F. If a wrinkle develops, the covering can be carefully lifted and reapplied., Covering an Open-Structure Wing:, If covering an open-structure wing, ,

UltraCote Green Hangar 9 UltraCote is a high tech polyester ...

Hobby-Lobby

PILOT PROFICIENCY KIT (DX6I WITH TWO AR400 AND PHOENIX 4)

All typessport, scale, heli, scale, gliders, jets and more

Key Features:, 2 Bonus AR400 Spektrum Receivers Included FREE!,

Everything you need to become a pro pilot The Phoenix ...

Hobby-Lobby

PHOENIX R/C PRO SIMULATOR V4.0 W/DX5E

Spektrum DX4e/DX6/DX6i/DX7/DX7s/DX8 (No adapter required) - NoteThe DX7se is not compatible with the simulator.

Key Features:, Revolutionary InfinityScape 3D landscale generator lets you fly beyond the horizon over beautiful, ever-changing terrain that you create and control, To successfully use Phoenix, you will need the following:, IBM-compatible PC computer with 1.0 GHz Pentium 3/4 or AMD Athlon/64 compatible processor or better, Or alternatively:, An Intel-based Apple Macintosh computer running Microsoft Windows XP, Vista or 7 with the above specifications under one of the following systems:, Bootcamp (recommended), Adapter Requirements:, Adapters may be required depending on the transmitter you wish to use., Please note that the following transmitters are not supported:, No USB controller devices/joysticks,

Phoenix R/C Pro Simulator V4.0 w/DX5e When the rain clouds ...

Hobby-Lobby

PHOENIX R/C PRO SIMULATOR V4.0

Spektrum DX4e/DX6/DX6i/DX7/DX7s/DX8 (No adapter required) - NoteThe DX7se is not compatible with the simulator.

Key Features:, Revolutionary InfinityScape 3D landscale generator lets you fly beyond the horizon over beautiful, ever-changing terrain that you create and control, To successfully use Phoenix, you will need the following:, IBM-compatible PC computer with 1.0 GHz Pentium 3/4 or AMD Athlon/64 compatible processor or better, Or alternatively:, An Intel-based Apple Macintosh computer running Microsoft Windows XP, Vista or 7 with the above specifications under one of the following systems:, Bootcamp (recommended), Adapter Requirements:, Adapters may be required depending on the transmitter you wish to use., Please note that the following transmitters are not supported:, No USB controller devices/joysticks,

Phoenix R/C Pro Simulator V4.0 When the rain clouds are ...

Hobby-Lobby

MINI PULSE XT ARF

Experience LevelIntermediate
FuelTypeElectric
HardwareIncluded Yes
Overall Length37.5 in (875mm)
Plane TypePark Flyers
Plane TypeSport Planes
Power Plant Size450-480 Electric
Prop Size10x8 Electric
Radio4 channels
Recommended EnvironmentOutdoor
Servos4 sub-micros
Wingspan42.5 in (1080mm)

Key Features:, 95% factory-built; get flying in 3 hours or less, Technical Specifications:, CG (center of gravity):, 2-3/4 in (70mm) behind the leading edge, Control Throw (Ailerons):, 3/8 in (9mm) Low Rate or 1/2 in (13mm) High Rate, Control Throw (Elevator):, 1/4 in (6mm) Low Rate or 1/2 in (13mm) High Rate, Control Throw (Rudder):, 1-1/4 in (32mm) Low Rate or 1-1/2 in (38mm) High Rate, Flying Weight:, 25-27 oz (795-965g=), Motor Size:, Park 450 BL Outrunner 890Kv, Recommended Battery:, 2100 mAh 3-cell 11.1V Li-Po, Speed Control:, 30A Pro SB Brushless, Trim Scheme Colors:, UltraCote White (#870) Deep Blue (#873) and Orange (#877), Wing Area:, 330 sq in (21.3 sq dm,

The Mini Pulse XT The Mini Pulse XT is another ...

Hobby-Lobby

P-51 MUSTANG MK II PTS RTF (OVERSIZE)

Needed to CompleteFuel (10% to 15% nitro content), Glow Plug Wrench, Glow Plug Igniter with Charger
Glow Plug, Manual Fuel Pump, Flat blade screwdriver, Hex wrench3/32 in or 2.5mm, Felt-tipped pen, Adjustable wrench, Phillips screwdriver, Pliers
Length50.39 in (1280mm)
Experience LevelBeginner

P-51 Mustang MkII PTS RTF Highlights:, Ready-to-fly right from the box, Technical Specifications:, P-51 Mustang MkII PTS RTF Specs:, Wingspan:, 58.25 in (1479.55mm), Flying Weight:, 6.5�7 lb (2.95�3.18 kg), Engine Size:, Evolution Trainer Power System (installed), Radio:, Spektrum 2.4GHz DX6i DSM2 radio with AR6200 receiver (installed),

A Beloved Classic Designed With the Beginner in Mind Hangar ...

Hobby-Lobby

P-51 MUSTANG MK II PTS RTF (OVERSIZE)

Needed to CompleteFuel (10% to 15% nitro content), Glow Plug Wrench, Glow Plug Igniter with Charger
Glow Plug, Manual Fuel Pump, Flat blade screwdriver, Hex wrench3/32 in or 2.5mm, Felt-tipped pen, Adjustable wrench, Phillips screwdriver, Pliers
Length50.39 in (1280mm)
Experience LevelBeginner

P-51 Mustang MkII PTS RTF Highlights:, Ready-to-fly right from the box, Technical Specifications:, P-51 Mustang MkII PTS RTF Specs:, Wingspan:, 58.25 in (1479.55mm), Flying Weight:, 6.5�7 lb (2.95�3.18 kg), Engine Size:, Evolution Trainer Power System (installed), Radio:, Spektrum 2.4GHz DX6i DSM2 radio with AR6200 receiver (installed),

A Beloved Classic Designed With the Beginner in Mind Hangar ...

RCPlanet

GREAT PLANES REALFLIGHT G3 G3.5 G4 EXPANSION PACK 2 GPMZ4112

, ,

Great Planes RealFlight G3 Expansion Pack 2. Expansion Pack 2 ...

BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby